I had to remove an old crumbling brick arch and walls. I built a frame the same thickness as the old wall as request by the customer and clad it in the feather board front and back. the top has a pitched top again using feather edge. The gate was the old gate refitted.
I also had to refit loose paving around and in front.
This is a conservatory I tiled. I also had to remove the old steps as they were to shallow for the customer. The challenge was the new steps needed to be rounded. As the tiles supplied were a crisp sharp edge I had to get top curved steps laser cut.
Using the large 600mm tiles made the conservatory feel larger as the existing pattern was far to busy. Also it wasn't straight I had to adjust the pitch from the external doors and internal step to make it straight and flow nicely.